dmesg - Custom RK3588
Booting Linux on physical CPU 0x0000000000 [0x412fd050]
Linux version 5.10.209 (root@adw-Hi-Fi-A88S3E) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #20 SMP Tue Sep 3 10:09:05 CST 2024
random: crng init done
Machine model: Rockchip RK3588 EVB7 V11 Board
earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
printk: bootconsole [uart8250] enabled
efi: UEFI not found.
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
OF: reserved mem: initialized node cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000200000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x00000007ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000200000-0x00000000083fffff]
node 0: [mem 0x0000000009400000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x00000003fbffffff]
node 0: [mem 0x00000003fc500000-0x00000003ffefffff]
node 0: [mem 0x0000000400000000-0x00000007ffffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x00000007ffffffff]
On node 0 totalpages: 8316928
DMA zone: 15288 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 978432 pages, LIFO batch:63
Normal zone: 114688 pages used for memmap
Normal zone: 7338496 pages, LIFO batch:63
On node 0, zone Normal: 256 pages in unavailable ranges
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.2
percpu: Embedded 30 pages/cpu s83800 r8192 d30888 u122880
pcpu-alloc: s83800 r8192 d30888 u122880 alloc=30*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on. Total pages: 8186952
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
Memory: 32265528K/33267712K available (19008K kernel code, 3538K rwdata, 7060K rodata, 6784K init, 590K bss, 740040K reserved, 262144K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 58198 entries in 228 pages
ftrace: allocated 228 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU dyntick-idle grace-period acceleration is enabled.
All grace periods are expedited (rcu_expedited).
Rude variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 480 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
ITS [mem 0xfe640000-0xfe65ffff]
ITS@0x00000000fe640000: allocated 8192 Devices @3fc6f0000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @3fc700000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
ITS [mem 0xfe660000-0xfe67ffff]
ITS@0x00000000fe660000: allocated 8192 Devices @3fc720000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @3fc730000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x00000003fc740000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x00000003fc750000
rcu: Offload RCU callbacks from CPUs: 0-7.
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
rcu: Hierarchical SRCU implementation.
Platform MSI: msi-controller@fe640000 domain created
Platform MSI: msi-controller@fe660000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
GICv3: CPU1: using allocated LPI pending table @0x00000003fc760000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
GICv3: CPU2: using allocated LPI pending table @0x00000003fc770000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
GICv3: CPU3: using allocated LPI pending table @0x00000003fc780000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
GICv3: CPU4: using allocated LPI pending table @0x00000003fc790000
CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
GICv3: CPU5: using allocated LPI pending table @0x00000003fc7a0000
CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
GICv3: CPU6: using allocated LPI pending table @0x00000003fc7b0000
CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
GICv3: CPU7: using allocated LPI pending table @0x00000003fc7c0000
CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: LSE atomic instructions
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU features: detected: RCpc load-acquire (LDAPR)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Registered FIQ tty driver
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
thermal thermal_zone1: power_allocator: sustainable_power will be estimated
thermal thermal_zone2: power_allocator: sustainable_power will be estimated
thermal thermal_zone3: power_allocator: sustainable_power will be estimated
thermal thermal_zone4: power_allocator: sustainable_power will be estimated
thermal thermal_zone5: power_allocator: sustainable_power will be estimated
thermal thermal_zone6: power_allocator: sustainable_power will be estimated
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
ramoops: dmesg-0 0x18000@0x0000000000110000
ramoops: dmesg-1 0x18000@0x0000000000128000
ramoops: console 0x80000@0x0000000000140000
ramoops: pmsg 0x30000@0x00000000001c0000
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0xe0000@0x110000, ecc: 0
rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
rockchip-pinctrl pinctrl: probed pinctrl
fiq_debugger fiq_debugger.0: IRQ fiq not found
fiq_debugger fiq_debugger.0: IRQ wakeup not found
fiq_debugger_probe: could not install nmi irq handler
printk: console [ttyFIQ0] enabled
printk: bootconsole [uart8250] disabled
Registered fiq debugger ttyFIQ0
vcc5v0_sys: supplied by vcc12v_dcin
vcc5v0_usbdcin: supplied by vcc12v_dcin
vcc5v0_usb: supplied by vcc5v0_usbdcin
vcc_1v1_nldo_s3: supplied by vcc5v0_sys
vbus5v0_typec: supplied by vcc5v0_usb
vcc3v3_pcie30: supplied by vcc12v_dcin
vcc5v0_host: supplied by vcc5v0_usb
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
rockchip-cpuinfo cpuinfo: SoC : 35881000
rockchip-cpuinfo cpuinfo: Serial : 25511d00eacb2118
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=23 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/O].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse: init (API version 7.32)
SGI XFS with security attributes, no debug enabled
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
pwm-backlight backlight: supply power not found, using dummy regulator
of_pwm_get(): can't parse "pwms" property
pwm-backlight backlight: unable to request PWM
pwm-backlight: probe of backlight failed with error -2
pwm-backlight dsi0_backlight: supply power not found, using dummy regulator
pwm-backlight dsi1_backlight: supply power not found, using dummy regulator
iep: Module initialized.
mpp_service mpp-srv: a712cbc22c5a author: Yandong Lin 2024-05-21 video: rockchip: mpp: optimize the schedule of enc/dec
mpp_service mpp-srv: probe start
mpp_vdpu1 fdb51000.avsd-plus: Adding to iommu group 1
mpp_vdpu1 fdb51000.avsd-plus: probe device
mpp_vdpu1 fdb51000.avsd-plus: reset_group->rw_sem_on=0
mpp_vdpu1 fdb51000.avsd-plus: reset_group->rw_sem_on=0
mpp_vdpu1 fdb51000.avsd-plus: probing finish
mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
mpp_vdpu2 fdb50400.vdpu: probe device
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: probing finish
mpp_vepu2 jpege-ccu: probing start
mpp_vepu2 jpege-ccu: probing finish
mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
mpp_vepu2 fdb50000.vepu: probing start
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: probing finish
mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
mpp_vepu2 fdba0000.jpege-core: probing start
mpp_vepu2 fdba0000.jpege-core: attach ccu success
mpp_vepu2 fdba0000.jpege-core: probing finish
mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
mpp_vepu2 fdba4000.jpege-core: probing start
mpp_vepu2 fdba4000.jpege-core: attach ccu success
mpp_vepu2 fdba4000.jpege-core: probing finish
mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
mpp_vepu2 fdba8000.jpege-core: probing start
mpp_vepu2 fdba8000.jpege-core: attach ccu success
mpp_vepu2 fdba8000.jpege-core: probing finish
mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
mpp_vepu2 fdbac000.jpege-core: probing start
mpp_vepu2 fdbac000.jpege-core: attach ccu success
mpp_vepu2 fdbac000.jpege-core: probing finish
mpp-iep2 fdbb0000.iep: Adding to iommu group 9
mpp-iep2 fdbb0000.iep: probe device
mpp-iep2 fdbb0000.iep: allocate roi buffer failed
mpp-iep2 fdbb0000.iep: probing finish
mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
mpp_jpgdec fdb90000.jpegd: probe device
mpp_jpgdec fdb90000.jpegd: probing finish
mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1024: No niu aclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1027: No niu hclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1024: No niu aclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1027: No niu hclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
mpp_rkvenc2 rkvenc-ccu: probing start
mpp_rkvenc2 rkvenc-ccu: probing finish
mpp_av1dec: Adding child /av1d@fdc70000
mpp_av1dec: register device av1d-master
mpp_av1dec av1d-master: av1_iommu_of_xlate,784
av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
mpp_av1dec av1d-master: Adding to iommu group 17
mpp_av1dec av1d-master: probing start
mpp_av1dec av1d-master: probing finish
mpp_service mpp-srv: probe success
dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
rockchip-pvtm fda40000.pvtm: pvtm@0 probed
rockchip-pvtm fda50000.pvtm: pvtm@1 probed
rockchip-pvtm fda60000.pvtm: pvtm@2 probed
rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
rockchip-system-monitor rockchip-system-monitor: system monitor probe
rockchip-vop2 fdd90000.vop: Adding to iommu group 16
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00939fb08)
dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0093ae690)
dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
brd: module loaded
loop: module loaded
zram: Added device: zram0
lkdtm: No crash points registered, enable through debugfs
system_heap: orders[0] = 6
system_heap: orders[1] = 4
system_heap: orders[2] = 0
ahci fe210000.sata: supply ahci not found, using dummy regulator
ahci fe210000.sata: supply phy not found, using dummy regulator
ahci fe210000.sata: supply target not found, using dummy regulator
ahci fe210000.sata: forcing port_map 0x0 -> 0x1
ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
scsi host0: ahci
ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 91
rockchip-spi feb20000.spi: no high_speed pinctrl state
rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
rk806 spi2.0: ON: 0x40 OFF:0x0
vdd_gpu_s0: supplied by vcc5v0_sys
vdd_cpu_lit_s0: supplied by vcc5v0_sys
vdd_log_s0: supplied by vcc5v0_sys
vdd_vdenc_s0: supplied by vcc5v0_sys
vdd_ddr_s0: supplied by vcc5v0_sys
vdd2_ddr_s3: supplied by vcc5v0_sys
vdd_2v0_pldo_s3: supplied by vcc5v0_sys
vcc_3v3_s3: supplied by vcc5v0_sys
vddq_ddr_s0: supplied by vcc5v0_sys
vcc_1v8_s3: supplied by vcc5v0_sys
vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
vcc_3v3_s0: supplied by vcc5v0_sys
vccio_sd_s0: supplied by vcc5v0_sys
pldo6_s3: supplied by vcc5v0_sys
rk806 spi2.0: no sleep-setting state
rk806 spi2.0: no reset-setting pinctrl state
rk806 spi2.0: no dvs-setting pinctrl state
rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator
rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5
rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
rk_gmac-dwmac fe1c0000.ethernet: TSO supported
rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
PPP generic driver version 2.4.2
usbcore: registered new interface driver rndis_wlan
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver qmi_wwan
usbcore: registered new interface driver qmi_wwan_q
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform fc800000.usb: EHCI Host Controller
ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.209 ehci_hcd
usb usb1: SerialNumber: fc800000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform fc880000.usb: EHCI Host Controller
ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.209 ehci_hcd
usb usb2: SerialNumber: fc880000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform fc840000.usb: Generic Platform OHCI controller
ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 5.10.209 ohci_hcd
usb usb3: SerialNumber: fc840000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform fc8c0000.usb: Generic Platform OHCI controller
ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
ata1: SATA link down (SStatus 0 SControl 300)
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: Generic Platform OHCI controller
usb usb4: Manufacturer: Linux 5.10.209 ohci_hcd
usb usb4: SerialNumber: fc8c0000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 5
xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000800002010010
xhci-hcd xhci-hcd.3.auto: irq 136, io mem 0xfcd00000
xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 6
xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.10.209 xhci-hcd
usb usb5: SerialNumber: xhci-hcd.3.auto
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.10.209 xhci-hcd
usb usb6: SerialNumber: xhci-hcd.3.auto
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
phy phy-fd5d4000.syscon:[email protected]: illegal mode
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 7
xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000800002010010
xhci-hcd xhci-hcd.4.auto: irq 137, io mem 0xfc400000
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 8
xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.10.209 xhci-hcd
usb usb7: SerialNumber: xhci-hcd.4.auto
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.10.209 xhci-hcd
usb usb8: SerialNumber: xhci-hcd.4.auto
hub 8-0:1.0: USB hub found
hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver cp210x
usbcore: registered new interface driver ftdi_sio
usbcore: registered new interface driver keyspan
usbcore: registered new interface driver option
usbcore: registered new interface driver oti6858
usbcore: registered new interface driver pl2303
usbcore: registered new interface driver qcserial
usbcore: registered new interface driver sierra
ILITEK INFO line = 384 ilitek_touch_driver_init : add touch device driver i2c driver.
usbcore: registered new interface driver usbtouchscreen
input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.1.auto/input/input0
i2c /dev entries driver
vdd_cpu_big0_s0: supplied by vcc5v0_sys
vdd_cpu_big1_s0: supplied by vcc5v0_sys
vdd_npu_s0: supplied by vcc5v0_sys
i2c i2c-4: 1 i2c clients have been registered at 0x68
ILITEK INFO line = 195 ilitek_touch_driver_probe : *** ilitek_touch_driver_probe ***
ILITEK INFO line = 2062 ilitek_main_probe :
ILITEK INFO line = 1657 ilitek_power_on : POWER ON
ILITEK INFO line = 1602 ilitek_get_gpio_num : reset_gpio = 113 irq_gpio = 112
ILITEK INFO line = 597 ilitek_reset : delay = 200
usb 2-1: new high-speed USB device number 2 using ehci-platform
ILITEK INFO line = 1806 ilitek_read_tp_info : driver version 5.0.0.0.0.0.0
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=61.60
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 551 ilitek_i2c_write_and_read : ilitek_i2c_write_and_read, i2c write error, ret = -6
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 471 ilitek_i2c_transfer : ilitek_i2c_transfer err
ILITEK ERR line = 560 ilitek_i2c_write_and_read : ilitek_i2c_write_and_read, i2c read error, ret = -6
ILITEK ERR line = 2069 ilitek_main_probe : init read tp info error so exit
ILITEK INFO line = 635 ilitek_free_gpio : reset_gpio is valid so free
ILITEK INFO line = 639 ilitek_free_gpio : irq_gpio is valid so free
rtc-hym8563 6-0051: rtc information is valid
rtc-hym8563 6-0051: registered as rtc0
rtc-hym8563 6-0051: setting system clock to 2024-08-25T19:27:03 UTC (1724614023)
rkcifhw fdce0000.rkcif: Adding to iommu group 15
rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
rkcif rkcif-mipi-lvds2: Adding to iommu group 15
rkcif rkcif-mipi-lvds2: rkcif driver version: v00.02.00
rkcif rkcif-mipi-lvds2: attach to cif hw node
rkcif rkcif-mipi-lvds2: rkcif wait line 0
rkcif rkcif-mipi-lvds2: rkcif fastboot reserve bufs num 3
: terminal subdev does not exist
: terminal subdev does not exist
: terminal subdev does not exist
: terminal subdev does not exist
: get_remote_sensor: video pad[0] is null
: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
: rkcif_scale_set_fmt: req(40, 30) src out(0, 0)
: get_remote_sensor: video pad[0] is null
: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
: rkcif_scale_set_fmt: req(40, 30) src out(0, 0)
: get_remote_sensor: video pad[0] is null
: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
: rkcif_scale_set_fmt: req(40, 30) src out(0, 0)
: get_remote_sensor: video pad[0] is null
: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
: rkcif_scale_set_fmt: req(40, 30) src out(0, 0)
rkcif rkcif-mipi-lvds2: No memory-region-thunderboot specified
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
rockchip-mipi-csi2 mipi2-csi2: attach to csi2 hw node
rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
rockchip-mipi-csi2: Async registered subdev
rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
rkisp_hw fdcb0000.rkisp: Adding to iommu group 14
rkisp_hw fdcb0000.rkisp: is_thunderboot: 0
rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property
rkisp_hw fdcb0000.rkisp: max input:0x0@0fps
rkisp_hw fdcb0000.rkisp: no find phandle sram
rkisp rkisp0-vir0: rkisp driver version: v02.05.01
rkisp rkisp0-vir0: No memory-region-thunderboot specified
rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_get_phy_cpuid_func: mpidr: 0x0000000500, phy_cpuid:0x5
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x500, Bound_cpu:5, wdt_cfg_bound_cpu:2, phy_cpuid:5
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol ATH3K registered
usbcore: registered new interface driver bfusb
usbcore: registered new interface driver btusb
cpu cpu0: bin=0
cpu cpu0: leakage=11
cpu cpu0: pvtm=1416
cpu cpu0: pvtm-volt-sel=1
cpu cpu4: bin=0
cpu cpu4: leakage=8
cpu cpu4: pvtm=1641
cpu cpu4: pvtm-volt-sel=3
cpu cpu6: bin=0
cpu cpu6: leakage=9
cpu cpu6: pvtm=1660
cpu cpu6: pvtm-volt-sel=3
cpu cpu0: avs=0
cpu cpu4: avs=0
cpu cpu6: avs=0
cpu cpu0: EM: OPP:816000 is inefficient
cpu cpu0: EM: OPP:600000 is inefficient
cpu cpu0: EM: created perf domain
cpu cpu0: l=15000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
cpu cpu4: EM: OPP:816000 is inefficient
cpu cpu4: EM: OPP:600000 is inefficient
cpu cpu4: EM: created perf domain
cpu cpu4: l=15000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
cpu cpu6: EM: OPP:816000 is inefficient
cpu cpu6: EM: OPP:600000 is inefficient
cpu cpu6: EM: created perf domain
cpu cpu6: l=15000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
dwmmc_rockchip fe2d0000.mmc: No normal pinctrl state
dwmmc_rockchip fe2d0000.mmc: No idle pinctrl state
dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.
dwmmc_rockchip fe2d0000.mmc: Version ID is 270a
dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 93,32 bit host data width,256 deep fifo
dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq
mmc_host mmc2: card is non-removable.
dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 92,32 bit host data width,256 deep fifo
arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
dwmmc_rockchip fe2c0000.mmc: Failed getting OCR mask: -22
dwmmc_rockchip fe2c0000.mmc: could not set regulator OCR (-22)
dwmmc_rockchip fe2c0000.mmc: failed to enable vmmc regulator
cryptodev: driver 1.12 loaded.
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
optee: probing for conduit method.
optee: revision 3.13 (185dc3c9)
optee: dynamic shared memory is enabled
optee: initialized driver
usbcore: registered new interface driver snd-usb-audio
rockchip-i2s-tdm fddf0000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
rockchip-i2s-tdm fe470000.i2s: Register PCM for TRCM mode
rockchip-i2s-tdm fddf4000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
debugfs: File 'Capture' in directory 'dapm' already present!
input: rockchip,hdmiin rockchip,hdmiin as /devices/platform/hdmiin-sound/sound/card0/input1
input: headset-keys as /devices/platform/es8388-sound/input/input2
mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
mmc0: Host Software Queue enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 A3A562 115 GiB
mmcblk0boot0: mmc0:0001 A3A562 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 A3A562 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 A3A562 partition 3 16.0 MiB, chardev (236:0)
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card1/input3
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
[BT_RFKILL]: Enter rfkill_rk_init
[WLAN_RFKILL]: Enter rfkill_wlan_init
[WLAN_RFKILL]: Enter rfkill_wlan_probe
[WLAN_RFKILL]: can't find rockchip,grf property
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s
[WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.
[WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[WLAN_RFKILL]: Exit rfkill_wlan_probe
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: bt_default device registered.
input: bt-powerkey as /devices/platform/wireless-bluetooth/input/input4
Key type dns_resolver registered
imx415 3-001a: driver version: 00.01.08
imx415 3-001a: Get hdr mode failed! no hdr default
imx415 3-001a: detect imx415 lane 4
imx415 3-001a: Failed to get reset-gpios
imx415 3-001a: Failed to get power-gpios
imx415 3-001a: could not get default pinstate
imx415 3-001a: could not get sleep pinstate
imx415 3-001a: supply dvdd not found, using dummy regulator
imx415 3-001a: supply dovdd not found, using dummy regulator
vendor storage:20190527 ret = 0
imx415 3-001a: Unexpected sensor id(000000), ret(-5)
Loading compiled-in X.509 certificates
pstore: Using crash dump compression: deflate
rga3 fdb60000.rga: Adding to iommu group 2
rga3 fdb60000.rga: probe successfully, irq = 37, hw_version:3.0.76831
rga3 fdb70000.rga: Adding to iommu group 3
rga3 fdb70000.rga: probe successfully, irq = 38, hw_version:3.0.76831
rga2 fdb80000.rga: probe successfully, irq = 39, hw_version:3.2.63318
rga_iommu: IOMMU binding successfully, default mapping core[0x1]
rga: Module initialized. v1.3.3
mali fb000000.gpu: Kernel DDK version g21p0-01eac0
mali fb000000.gpu: GPU metrics tracepoint support enabled
mali fb000000.gpu: bin=0
mali fb000000.gpu: leakage=13
debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
mali fb000000.gpu: pvtm=854
mali fb000000.gpu: pvtm-volt-sel=2
mali fb000000.gpu: avs=0
W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
mali fb000000.gpu: Register LUT 000a0800 initialized for GPU arch 0x000a0806
mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
mali fb000000.gpu: falling back to closest match: r0p0 status 0
mali fb000000.gpu: Execution proceeding normally with fallback match
mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
mali fb000000.gpu: No priority control manager is configured
mali fb000000.gpu: Large page allocation set to false after hardware feature check
mali fb000000.gpu: No memory group manager is configured
mali fb000000.gpu: Protected memory allocator not available
mali fb000000.gpu: l=15000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
mali fb000000.gpu: Probed as mali0
mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
pcie20_avdd0v85: supplied by vdd_0v85_s0
pcie20_avdd1v8: supplied by avcc_1v8_s0
pcie30_avdd0v75: supplied by avdd_0v75_s0
pcie30_avdd1v8: supplied by avcc_1v8_s0
vcc3v3_lcd0_n: supplied by vcc_3v3_s3
vcc3v3_lcd0_dsi1: supplied by vcc_3v3_s3
mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
mpp_rkvenc2 fdbd0000.rkvenc-core: bin=0
mpp_rkvenc2 fdbd0000.rkvenc-core: leakage=10
mpp_rkvenc2 fdbd0000.rkvenc-core: leakage-volt-sel=0
mpp_rkvenc2 fdbd0000.rkvenc-core: avs=0
mpp_rkvenc2 fdbd0000.rkvenc-core: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
mpp_rkvenc2 fdbe0000.rkvenc-core: bin=0
mpp_rkvenc2 fdbe0000.rkvenc-core: leakage=10
mpp_rkvenc2 fdbe0000.rkvenc-core: leakage-volt-sel=0
mpp_rkvenc2 fdbe0000.rkvenc-core: avs=0
mpp_rkvenc2 fdbe0000.rkvenc-core: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
rockchip-dmc dmc: bin=0
rockchip-dmc dmc: leakage=33
rockchip-dmc dmc: leakage-volt-sel=1
rockchip-dmc dmc: soc version=0, speed=1
rockchip-dmc dmc: avs=0
rockchip-dmc dmc: current ATF version 0x100
rockchip-dmc dmc: normal_rate = 1560000000
rockchip-dmc dmc: reboot_rate = 2112000000
rockchip-dmc dmc: suspend_rate = 528000000
rockchip-dmc dmc: video_4k_rate = 1560000000
rockchip-dmc dmc: video_4k_10b_rate = 1560000000
rockchip-dmc dmc: video_svep_rate = 1560000000
rockchip-dmc dmc: boost_rate = 2112000000
rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
rockchip-dmc dmc: performance_rate = 2112000000
rockchip-dmc dmc: hdmirx_rate = 2112000000
rockchip-dmc dmc: deep_suspend_rate = 2112000000
rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
rockchip-dmc dmc: failed to get vop pn to msch rl
rockchip-dmc dmc: l=15000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
rockchip-dmc dmc: could not find power_model node
rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00939fb08)
dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.9.auto: dw_hdcp_qp_hdcp_probe success
rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0093ae690)
dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
input: adc-keys as /devices/platform/adc-keys/input/input5
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00939fb08)
dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.9.auto: dw_hdcp_qp_hdcp_probe success
rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0093ae690)
rockchip-drm display-subsystem: bound fde20000.dsi (ops 0xffffffc0093b0f28)
rockchip-drm display-subsystem: bound fde30000.dsi (ops 0xffffffc0093b0f28)
rockchip-drm display-subsystem: failed to parse loader memory
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 16(if:20, flag:0x0) for vp2 dclk: 148500000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out2 div: 2 dclk_core2 div: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop2 to 148500000, get 148500000
rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card2/input6
rkcif rkcif-mipi-lvds2: clear unready subdev num: 1
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif-mipi-lvds2: Async subdev notifier completed
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
RKNPU fdab0000.npu: Adding to iommu group 0
RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[drm] Initialized rknpu 0.9.6 20240322 for fdab0000.npu on minor 1
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 800x1280p56, type: 16(if:40, flag:0x0) for vp3 dclk: 66000000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out3 div: 2 dclk_core3 div: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop3 to 66000000, get 66000000
mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
RKNPU fdab0000.npu: RKNPU: bin=0
RKNPU fdab0000.npu: leakage=7
debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
dwmmc_rockchip fe2d0000.mmc: Successfully tuned phase to 135
RKNPU fdab0000.npu: pvtm=846
mmc2: new ultra high speed SDR104 SDIO card at address 0001
RKNPU fdab0000.npu: pvtm-volt-sel=2
RKNPU fdab0000.npu: avs=0
RKNPU fdab0000.npu: l=15000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
RKNPU fdab0000.npu: failed to find power_model node
RKNPU fdab0000.npu: RKNPU: failed to initialize power model
RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
rockchip-pm rockchip-suspend: not set pwm-regulator-config
rockchip-suspend not set sleep-mode-config for mem-lite
rockchip-suspend not set wakeup-config for mem-lite
rockchip-suspend not set sleep-mode-config for mem-ultra
rockchip-suspend not set wakeup-config for mem-ultra
I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:27:55', on 'Sep 2 2024'.
Mali:
Mali device driver loaded
rkisp rkisp0-vir0: clear unready subdev num: 1
rkisp0-vir0: Async subdev notifier completed
ALSA device list:
#0: rockchip,hdmiin
#1: rockchip-es8388
#2: rockchip-hdmi0
EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:6.
devtmpfs: mounted
Freeing unused kernel memory: 6784K
Run /sbin/init as init process
with arguments:
/sbin/init
#roo-09/09/2024
with environment:
HOME=/
TERM=linux
storagemedia=emmc
systemd[1]: Failed to look up module alias 'autofs4': Function not implemented
dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_encoder_atomic_enable] final DSI-Link bandwidth: 990000 x 4 Kbps
systemd-journald[288]: Received client request to flush runtime journal.
systemd-journald[288]: File /var/log/journal/82f388b1e16344c08b071b963413cd71/system.journal corrupted or uncleanly shut down, renaming and replacing.
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
rkcif_scale_ch3: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkcif_tools_id1: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
stream_cif_mipi_id3: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
rkcif_scale_ch2: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif_scale_ch0: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
stream_cif_mipi_id1: update sensor info failed -19
stream_cif_mipi_id0: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif_tools_id0: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
stream_cif_mipi_id2: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkcif_scale_ch1: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
rkcif_tools_id2: update sensor info failed -19
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_encoder_atomic_enable] final DSI-Link bandwidth: 439999 x 4 Kbps
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host input!
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
bcmdhd: loading out-of-tree module taints kernel.
[dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.591.52.27 (20240409-1)(20240411-2)(d83d8d7)
/home/share/work/debian_0158/external/rkwifibt/drivers/bcmdhd compiled on Sep 9 2024 at 10:17:21
[dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.36 (wlan=r892223-20231107-1)
[dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 1102848(1077K)
[WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=143, oob_irq_flags=0x4
[dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[dhd] dhd_wifi_platform_load: Enter
[dhd] Power-up adapter 'DHD generic adapter'
[dhd] dummy_probe: func->num=0x1;
[dhd] dummy_probe: class=0xff; vendor=0x2d0; device=0xaae8
[dhd] dummy_probe: func->num=0x2;
[dhd] dummy_probe: class=0xff; vendor=0x2d0; device=0xaae8
[dhd] wifi_platform_set_power = 1, delay: 200 msec
[dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
file system registered
read descriptors
read strings
rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
dwmac4: Master AXI performs any burst length
rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[dhd] wifi_platform_set_power = 1, sleep done: 200 msec
[dhd] wifi_platform_bus_enumerate device present 1
[dhd] ======== Card detection to detect SDIO card! ========
mali fb000000.gpu: Loading Mali firmware 0x1010000
android_work: did not send uevent (0 0 0000000000000000)
mali fb000000.gpu: Mali firmware git_sha: 221d2b3e5f4cf47df6227ccb24c82c4e4baa986e
[dhd] bcmsdh_register: register client driver
[dhd] bcmsdh_sdmmc_probe: Enter num=1
[dhd] bcmsdh_sdmmc_probe: Enter num=2
[dhd] bus num (host idx)=2, slot num (rca)=1, caps=0x4008010d
[dhd] found adapter info 'DHD generic adapter'
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 3, size 139264
[dhd] succeed to alloc static buf
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 4, size 0
[dhd] sdioh_attach: set sd_f2_blocksize 256
[dhd] sdioh_attach: sd clock rate = 150000000
[dhd] dhdsdio_probe : no mutex held
[dhd] dhdsdio_probe : set mutex lock
[dhd] F1 signature read @0x18000000=0x1042aae8
[dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4
[dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 7, size 42288
[dhd] dhd_conf_set_chiprev : devid=0xaae8, chip=0xaae8, chiprev=2
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 0, size 10320
[dhd] dhd_ioctl_entry_local invalid parameter net 0000000000000000 dev_priv 000000007f92365e
[dhd] CFG80211-ERROR) wl_is_fils_supported : FILS NOT supported, err -22
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 5, size 65536
[dhd] CFG80211-ERROR) wl_is_fils_supported : FILS NOT supported, err -19
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 19, size 65688
[dhd] dhd_attach(): thread:dhd_watchdog_thread:674 started
[dhd] dhd_attach(): thread:dhd_dpc:675 started
[dhd] dhd_attach(): thread:dhd_rxf:676 started
[dhd] dhd_deferred_work_init: work queue initialized
[dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=40, TCPDATA_INFO_MAXNUM=40
[dhd] dhd_dpc_thread: set dhd_dpc_prio 98
[dhd] sdioh_cis_read: func_cis_ptr[0]=0x1070
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 1, size 10300
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 2, size 65536
[dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[dhd] Dongle Host Driver, version 101.10.591.52.27 (20240409-1)(20240411-2)(d83d8d7)
/home/share/work/debian_0158/external/rkwifibt/drivers/bcmdhd compiled on Sep 9 2024 at 10:17:21
[dhd] Register interface [wlan0] MAC: c0:f5:35:1c:95:28
[dhd] [wlan0] wl_android_wifi_off : g_wifi_on=1 force_off=1
[dhd] dhd_bus_devreset: == Power OFF ==
[dhd] dhd_bus_stop: making DHD_BUS_DOWN
[dhd] bcmsdh_oob_intr_unregister: Enter
[dhd] bcmsdh_oob_intr_unregister: irq is not registered
[dhd] dhd_bus_devreset: making dhdpub up FALSE
[dhd] dhd_txglom_enable: enable 0
[dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[dhd] wifi_platform_set_power = 0, delay: 10 msec
[dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[WLAN_RFKILL]: rockchip_wifi_power: 0
[WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[WLAN_RFKILL]: wifi shut off power [GPIO-1-1]
[dhd] wifi_platform_set_power = 0, sleep done: 10 msec
[dhd] [wlan0] wl_android_wifi_off : out
[dhd] Register interface [wlan1] MAC: c2:f5:35:1c:95:28
[dhd] wl_android_post_init: 0
[dhd] dhdsdio_probe : mutex is released.
[dhd] _dhd_module_init: Exit err=0
[dhd] dhd_pri_open : no mutex held
[dhd] dhd_pri_open : set mutex lock
[dhd] [wlan0] dhd_open : Enter
[dhd] Dongle Host Driver, version 101.10.591.52.27 (20240409-1)(20240411-2)(d83d8d7)
/home/share/work/debian_0158/external/rkwifibt/drivers/bcmdhd compiled on Sep 9 2024 at 10:17:21
[dhd] dhd_open: ######### called for ifidx=0 #########
[dhd] [wlan0] wl_android_wifi_on : in g_wifi_on=0
[dhd] wifi_platform_set_power = 1, delay: 200 msec
[dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
[dhd] wifi_platform_set_power = 1, sleep done: 200 msec
[dhd] sdio_sw_reset: call mmc_hw_reset
ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
dwmmc_rockchip fe2d0000.mmc: Successfully tuned phase to 135
[dhd] sdioh_start: set sd_f2_blocksize 256
[dhd] dhd_bus_devreset: == Power ON ==
[dhd] F1 signature read @0x18000000=0x1042aae8
[dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4
[dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43752a2_ag.bin
[dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_ap6275s.txt
[dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43752a2_ag.blob
[dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
[dhd] dhd_os_open_image1: /vendor/etc/firmware/config.txt (240 bytes) open success
[dhd] dhd_conf_read_pm_params : PM = 0
[dhd] dhd_conf_read_pm_params : pm_in_suspend = 2
[dhd] dhd_conf_read_others : keep_alive_period = 120000
[dhd] dhd_conf_read_others : garp = 1
[dhd] dhd_conf_read_pm_params : suspend_bcn_li_dtim = 10
[dhd] dhd_conf_read_others : wl_preinit = pm2_sleep_ret=20
[dhd] dhd_conf_read_pkt_filter : pkt_filter_del id = 100 102 103 104 105 107
[dhd] dhd_conf_read_pkt_filter : pkt_filter_add[0][] = 142 0 0 77 0xffffffffffffffffffffffffffffff 0x2F6465766963652F77616B6575702F
[dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm43752a2_ag.bin (778905 bytes) open success
[dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm43752a2_ag.bin (778905 bytes) open success
[dhd] dhdsdio_download_code_file Using SINGLE image (size 778905)
[dhd] dhd_os_open_image1: /vendor/etc/firmware/nvram_ap6275s.txt (8355 bytes) open success
[dhd] # AP6275S_NVRAM_V1.7_20210726
[dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[dhd] bcmsdh_oob_intr_register: HW_OOB irq=143 flags=0x4
[dhd] dhd_dpc_thread: set dhd_dpc_prio 98
[dhd] wlc_ver_major 12, wlc_ver_minor 1
[dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1
[dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=40, TCPDATA_INFO_MAXNUM=40
[dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address c0:f5:35:1c:95:28
[dhd] dhd_os_open_image1: /vendor/etc/firmware/clm_bcm43752a2_ag.blob (29225 bytes) open success
[dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
[dhd] dhd_apply_default_clm: CLM download succeeded
[dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
[dhd] Firmware up: op_mode=0x0005, MAC=c0:f5:35:1c:95:28
[dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0
[dhd] arp_enable:1 arp_ol:0
[dhd] dhd_conf_add_pkt_filter : 142 0 0 77 0xffffffffffffffffffffffffffffff 0x2F6465766963652F77616B6575702F
[dhd] Driver: 101.10.591.52.27 (20240409-1)(20240411-2)
[dhd] Firmware: wl0: Aug 3 2021 17:32:21 version 18.35.387.23.57 (gdc961cae) FWID 01-fe5d6591
[dhd] CLM: 9.9.8_SS (2021-05-10 15:05:58)
[dhd] dhd_txglom_enable: enable 1
[dhd] dhd_conf_set_txglom_params : txglom_mode=copy
[dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
[dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
[dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
[dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1
[dhd] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
[dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
[dhd] failed to start ecounters
[dhd] dhd_ecounter_configure Ecounters start failed
[dhd] dhd_legacy_preinit_ioctls: d3_hostwake_delay IOVAR not present, proceed
[dhd] dhd_bus_check_srmemsize : srmem_size no need to change.
[dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created (WLC_E_ALLOW_CREDIT_BORROW)
[dhd] dhd_conf_set_country : set country CN, revision 0
[dhd] dhd_conf_set_country : Country code: CN (CN/0)
[dhd] [wlan0] wl_android_wifi_on : Success
[dhd] [wlan0] wl_cfg80211_up : Roam channel cache enabled
[dhd] [wlan0] dhd_open : Exit ret=0
[dhd] [wlan0] dhd_pri_open : tx queue started
[dhd] dhd_pri_open : mutex is released.
[dhd] dhd_static_if_open : no mutex held
[dhd] dhd_static_if_open : set mutex lock
[dhd] [wlan1] dhd_static_if_open : Enter
[dhd] [wlan0] dhd_open : Primary net_device is already up
[dhd] CFG80211-ERROR) wl_cfg80211_deinit_p2p_discovery : Disabling P2P Discovery Interface
[dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 8, size 44584
[dhd] dhd_wlfc_enable: ret=0
[dhd] dhd_wlfc_enable: ret=0
[BT_RFKILL]: bt shut off power
[dhd] dhd_clear_del_in_progress
[dhd] [wlan1] dhd_static_if_open : Exit ret=0
[dhd] dhd_static_if_open : mutex is released.
[dhd] P2P interface registered
[dhd] CFGP2P-ERROR) wl_cfgp2p_set_discovery : p2p_disc 1 error -16
[dhd] CFGP2P-ERROR) wl_cfgp2p_init_discovery : set discover error
[dhd] CFGP2P-ERROR) wl_cfgp2p_enable_discovery : init discovery error -16
[dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized
[dhd] CFGP2P-ERROR) wl_cfgp2p_start_p2p_device : P2P enable discovery failed, ret=-16
[dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized
[dhd] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered
[dhd] CFG80211-ERROR) wl_cfg80211_flush_pmksa : Not supporting Flushing pmklist on virtual interfaces than primary interface, primary_dev wlan0 dev wlan1
[dhd] P2P interface registered
[dhd] CFGP2P-ERROR) wl_cfgp2p_set_discovery : p2p_disc 1 error -16
[dhd] CFGP2P-ERROR) wl_cfgp2p_init_discovery : set discover error
[dhd] CFGP2P-ERROR) wl_cfgp2p_enable_discovery : init discovery error -16
[dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized
[dhd] CFGP2P-ERROR) wl_cfgp2p_start_p2p_device : P2P enable discovery failed, ret=-16
[dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized
[dhd] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host input!
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
systemd-journald[288]: File /var/log/journal/82f388b1e16344c08b071b963413cd71/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
hdmi-audio-codec hdmi-audio-codec.6.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
hdmi-audio-codec hdmi-audio-codec.6.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off
hdmi-audio-codec hdmi-audio-codec.6.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty
rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
stream_cif_mipi_id0: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
stream_cif_mipi_id1: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
rkcif_tools_id2: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
stream_cif_mipi_id2: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
stream_cif_mipi_id3: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif_scale_ch0: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkcif_scale_ch1: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
rkcif_scale_ch2: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
rkcif_scale_ch3: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
rkcif_tools_id0: update sensor info failed -19
rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
rkcif_tools_id1: update sensor info failed -19